key_press
0x00000000
HELLO! BOOT0 is starting!
boot0 version : 4.0.0
boot0 commit : 4957b8055313f6768659ed788f0a17e34b4c3eec

fel_flag = 0x00000000
rtc[0] value = 0x00000000
rtc[1] value = 0x00000000
rtc[2] value = 0x00000000
rtc[3] value = 0x00000000
rtc[4] value = 0x00000000
rtc[5] value = 0x00000000
rtc[6] value = 0x00000000
rtc[7] value = 0x00000000
DRAM DRIVE INFO: V1.3
the chip id is 0x00000081
the chip id is 0x00000081
the chip id is 0x00000081
the chip id is 0x00000081
the chip id is 0x00000081
READ DQS LCDL = 002e2f2f
DRAM Type = 3 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
DRAM CLK = 432 MHz
DRAM zq value: 003b3bfb
DRAM dram para1: 10f20200
DRAM dram para2: 00000001
DRAM workmode1: 000009f4
DRAM SIZE =512 M
odt delay
dram size =512
card boot number = 0
card no is 0
sdcard 0 line count 4
[mmc]: mmc driver ver 2015-04-13 16:07:39
[mmc]: ***Try SD card 0***
[mmc]: SD/MMC Card: 4bit, capacity: 7639MB
[mmc]: vendor: Man 00744a45 Snr e520128c
[mmc]: product: USD
[mmc]: revision: 1.0
[mmc]: ***SD/MMC 0 init OK!!!***
sdcard 0 init ok
The size of uboot is 000e4000.
sum=beef20c7
src_sum=beef20c7
Succeed in loading uboot from sdmmc flash.
Ready to disable icache.
Jump to secend Boot.
SUNXI_NORMAL_MODE
[      0.366]e mode

U-Boot 2011.09-rc1-00000-g4957b80 (May 23 2017 - 17:38:16) Allwinner Technology

[      0.374]version: 1.1.0
[      0.377]uboot commit : 4957b8055313f6768659ed788f0a17e34b4c3eec

normal mode
[      0.388]pmbus:   ready
not set main pmu id
axp_probe error
gpio value=0x20000
[      0.426]PMU: pll1 1008 Mhz,PLL6=600 Mhz
AXI=336 Mhz,AHB=200 Mhz, APB1=100 Mhz
sid read already
fel key new mode
run key detect
no key found
0x38
dram_para_set start
dram_para_set end
normal mode
[      0.456]DRAM:  512 MiB
relocation Offset is: 15af2000
[box standby] read rtc = 0x0
[box_start_os] mag be start_type no use
user_gpio config
user_gpio ok
gic: normal or no secure os mode
workmode = 0
MMC:     0
[      0.540][mmc]: mmc driver ver 2015-04-13 14:50:00
[      0.545][mmc]: get sdc_phy_wipe fail.
[      0.549][mmc]: get sdc0 sdc_erase fail.
[      0.553][mmc]: get sdc_f_max fail,use default 50000000Hz
[      0.558][mmc]: get sdc_ex_dly_used fail,use default dly
[      0.564][mmc]: SUNXI SD/MMC: 0
[      0.577][mmc]: *Try SD card 0*
[      0.610][mmc]: CID 0x744a4555 0x53442020 0x10e52012 0x8c00d88f
[      0.615][mmc]: mmc clk 50000000
[      0.619][mmc]: SD/MMC Card: 4bit, capacity: 7639MB
[      0.624][mmc]: boot0 capacity: 0KB,boot1 capacity: 0KB
[      0.629][mmc]: ***SD/MMC 0 init OK!!!***
[      0.633][mmc]: erase_grp_size:0x1WrBlk * 0x200 = 0x200 Byte
[      0.639][mmc]: secure_feature 0x0
[      0.642][mmc]: secure_removal_type  0x0
[      0.646]sunxi flash init ok
script config pll_de to 864 Mhz
Not Found clk pll_video1 in script
script config pll_video to 297 Mhz
script config pll_periph0 to 600 Mhz
DRV_DISP_Init end
[disk_read_fs] no the partition
error: open tv_vdid.fex, maybe it is not exist
[disk_read_fs] no the partition
error: open disp_rsl.fex, maybe it is not exist
[disk_read_fs] no the partition
error: open disp_rsl.fex, maybe it is not exist
boot_disp.auto_hpd=1
auto hpd check has 100 times!
auto check no any connected, the output_type is 4
[      1.793]finally, output_type=0x4, output_mode=0x4, screen_id=0x0, disp_para=0x0
try to read logic blk 0 without env partition
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
--------fastboot partitions--------
mbr not exist
base bootcmd=run setargs_mmc boot_normal
bootcmd set setargs_mmc
key 0
cant find rcvy value
cant find fstbt value
no misc partition is found
to be run cmd=run setargs_mmc boot_normal
[      1.841][mmc]: MMC Device 2 not found
[      1.845][mmc]: Can not find mmc dev
[      1.848][mmc]: read first backup failed in fun sdmmc_secure_storage_read line 1854
sunxi_secstorage_read fail
get secure storage map err
check user data form private
the private part isn't exist
WORK_MODE_BOOT
adver not need show
sunxi_bmp_logo_display
[      1.940][mmc]: blkcnt should not be 0
[      1.954]screen_id =0, screen_width =0, screen_height =0
[      1.959]frame buffer address 46400036
[      1.963]Hit any key to stop autoboot:  0
sunxi#
      j?INTERRUPT>
sunxi#?j8+
Unknown command '?' - try 'help'
sunxi#*???+?Tk)??T*h
                                      RHDS
Unknown command '*??' - try 'help'
sunxi#**!5<INTERRUPT>
sunxi#@i?ma#Ui q
